AM 240C - 240 W integrated amplifiers, 100 V line

mixer / amplificatore da 240 W che include uscite per altoparlanti da 25 / 50 / 100 V e 8 ohm (bassa impedenza). Funziona a rete (230 VAC) o a 24 VDC. Caratteristiche principali 1 ingresso bilanciato DIN / jack / XLR per MIC 1 microfono bilanciato (prioritario) tramite Talk Over o telecomando 2 ingressi microfonici bilanciati (jack / XLR) per MIC 2 e MIC 3 Tutti e tre gli ingressi possono essere commutati su microfoni alimentati Phantom (funzionamento interno), il MIC 3 può essere commutato online, un segnale acustico (2 toni "ding dong") può essere attivato dal microfono MIC 1 collegato alla presa DIN 5 poli (PA 100D Call Microphone Panel) o alla presa stereo sul pannello frontale (PA 100J Panel). 1 ingresso telefonico, messaggio di emergenza con priorità assoluta 2 ingressi RCA AUX (sintonizzatore, CD, ecc.) 1 ingresso e uscita per equalizzatore o amplificatore 1 uscita di registrazione Uscite diffusori su morsettiera a bassa impedenza di 8 ohm, alta impedenza 25 / 70 / 100 V Ventola di raffreddamento - - - - - - - - - - 240W mixer / amplifier including 25 / 50 / 100 V and 8 ohm (low impedance) speaker outputs. It works on mains (230 VAC) or 24 VDC. Main features 1 balanced DIN / jack / XLR input for MIC 1 balanced microphone (priority) via Talk Over or remote control 2 balanced microphone inputs (jack / XLR) for MIC 2 and MIC 3 All three inputs can be switched to phantom powered microphones (internal operation), MIC 3 can be switched online, a beep (2 "ding dong" tones) can be triggered from the MIC 1 microphone connected to the DIN socket 5 poles (PA 100D Call Microphone Panel) or to the stereo socket on the front panel (PA 100J Panel). 1 telephone input, emergency message with absolute priority 2 RCA AUX inputs (tuner, CD, etc.) 1 input and output for equalizer or amplifier 1 recording output Low impedance 8 ohm, high impedance 25 / 70 / 100 V speaker outputs on terminal block Cooling fan - - - - - - - - - - Technical characteristics

Type	amplifier / preamplifier
Power supply	115 - 230 VAC 50/60 Hz ±10% - switchable 24 VDC (maximum deviation 10%)
Output power	240 WRMS
Speaker outputs	8 ohm - 25 / 70 / 100 V
Output recording - TAPE	350 mV, 4.75 kohm
Line output - PRE OUT	1 V, 600 ohm
Inputs	MIC 1 to 3: 1 mV, 250 ohm symmetrical Phantom powering configurable AUX 1: 200 mV, 47 kohm, asymmetrical AUX 2: 500 mV, 47 kohm, asymmetrical Line (MIC 3): 200 mV, 47 kohm, symmetrical TEL: 0.1 to 1 V, 600 ohm, symmetrical, adjustable Power in: 1 V, 47 kohm, asymmetrical
Frequency response	MIC 1 - 3: 60 - 15,000 Hz ±3 dB AUX 1 - 2: 60 - 15,000 Hz ±3 dB TEL: 100 - 15,000 Hz ±3 dB
Total harmonic distortion	less than 1% at 1 kHz at RMS power
S/N ratio	All CCW volume settings: 75 dB below rated power MIC 1 to 3: 60 dB below RMS power AUX 1 - 2: 70 dB below RMS power TEL: 70 dB below RMS power
Tone Settings	Bass: ±10 dB at 100 Hz - Treble: ± 10 dB at 10 kHz
Settings	MIC 1 to 3: volume control AUX 1 - 2: volume control MASTER volume control Tonality: bass and treble TEL: input level MIC 3 (line/MIC): switch CHIME: inter ON/OFF 115 - 230 V: voltage switch
Consumption	Power supply: 720 W Battery: 16 A
Chime	2 tones Ding Dong preceding 1 microphone call
Priority	By detection / MIC 1 connected to DIN, Jack or XLR
Priority levels	AUX/CD 1
Dimensions (W x D x H)	430 x 260 x 88 mm
Weight	13 kg
Option montage rack 19" 2 U	mounting brackets EQ 2000

- - - - - - - - - - formato cm : 0x0x0 - - - - - - - - - - peso kg : 14