AM 60A - Preamplifier / amplifiers 60 W, 6 Inputs, 8 ohm, 25 / 70 / 100 V - 220 - 240 V AC / 24 V DC

Amplificatore integrato / mixer con uscita per linea a 100 V, potenza 60 W. Oltre che le uscite altoparlanti a 25, 70 e 100 V, è presente quella a 8 ohm a bassa impedenza. Funzionamento con rete a 230 VAC o 24 VDC. Caratteristiche principali 1 ingresso microfono DIN/jack/XLR bilanciato MIC 1 (prioritario) tramite Talk-Over o telecomando 2 ingressi microfonici bilanciati (jack/XLR), MIC 2 e MIC 3. Questi 3 ingressi sono commutabili su Phantom power (intervento interno), MIC 3 commutabile in linea, un segnale acustico (2 toni "ding dong") può essere attivato dal microfono MIC 1 inserito nella presa DIN 5 poli (postazione microfonica PA 100D ) o sulla presa jack stereo sul pannello frontale (console PA 100J) 1 ingresso telefonico, messaggio di emergenza, super priorità 2 ingressi AUX RCA (sintonizzatore, CD, ecc.) 1 ingresso e uscita per equalizzatore o amplificatore 1 uscita di registrazione Uscite diffusori su morsettiera BI 8 ohm, HI 25, 70 o 100 V Ventola di raffreddamento - - - - - - - - - - Integrated amplifier / mixer with 100 V line output, 60 W power. In addition to the 25, 70 and 100 V speaker outputs, there is a low impedance 8 ohm output. Operation with 230 VAC or 24 VDC mains. Main features 1 balanced DIN/jack/XLR microphone input MIC 1 (priority) via Talk-Over or remote control 2 balanced microphone inputs (jack/XLR), MIC 2 and MIC 3. These 3 inputs are switchable to Phantom power (internal intervention), MIC 3 switchable to line, an acoustic signal (2 "ding dong" tones) can be activated by the MIC 1 microphone inserted into the 5-pole DIN socket (PA 100D microphone station) or into the stereo jack socket on the front panel (PA 100J console) 1 telephone input, emergency message, super priority 2 AUX RCA inputs (tuner, CD, etc.) 1 input and output for equalizer or amplifier 1 recording output Speaker outputs on terminal block BI 8 ohm, HI 25, 70 or 100 V Cooling fan - - - - - - - - - - Technical characteristics

Power supply	115 - 230 VAC 50/60 Hz ±10% - switchable 24 VDC (maximum deviation 10%)
Output power	60 WRMS 90 W max.
Speaker outputs	8 ohm - 25 / 70 / 100 V
Output recording - TAPE	350 mV, 4.75 kohm
Line Output - PRE OUT	1 V, 600 ohm
Inputs	MIC 1 to 3: 1 mV, 250 ohm symmetrical Phantom powering configurable AUX 1: 200 mV, 47 kohm, asymmetrical AUX 2: 500 mV, 47 kohm, asymmetrical Line (MIC 3): 200 mV, 47 kohm, symmetrical TEL: 0.1 to 1 V, 600 ohm, symmetrical, adjustable Power in: 1 V, 47 kohm, asymmetrical
Frequency response	MIC 1 - 3: 60 - 15,000 Hz ±3 dB AUX 1 - 2: 60 - 15,000 Hz ±3 dB TEL: 100 - 15,000 Hz ±3 dB
Total harmonic distortion	less than 1% at 1 kHz at RMS power
S/N ratio	All CCW volume settings: 75 dB below rated power MIC 1 to 3: 60 dB below RMS power AUX 1 - 2: 70 dB below RMS power TEL: 70 dB below RMS power
Tone Settings	Bass: ±10 dB at 100 Hz - Treble: ± 10 dB at 10 kHz
Settings	MIC 1 to 3: volume control AUX 1 - 2: volume control MASTER volume control Tone control: bass and treble TEL: input level MIC 3 (line/MIC): switch CHIME: inter ON/OFF 115 - 230 V: voltage switch
Consumption	Sector: 170 W Battery: 2 A
Chime	2 tones Ding Dong preceding 1 microphone call
Priority	By detection / MIC 1 connected to DIN, jack or XLR
Priority levels	TEL/EMER: 3 - MIC 1: 2 - MIC 2: 1 - AUX/CD:1
Dimensions (W x D x H)	430 x 260 x 88 mm
Weight	8 kg
Option montage rack 19" 2 U	mounting brackets EQ 2000

- - - - - - - - - - formato cm : 0x0x0 - - - - - - - - - - peso kg : 9